During the production of wood-plastic composite materials, the conveying stage of wood-plastic powder often faces issues such as dust blasts, material blockages, excessive energy consumption, and severe equipment wear. Traditional mechanical conveying methods are not only inefficient but also prone to moisture and contamination of materials, affecting the quality of finished products. In addition, wood-plastic powders with different formulations, fineness, and moisture content have very different requirements for conveying systems. The lack of targeted solutions often leads to frequent downtime and maintenance, increasing operating costs.

Material characteristics: The basic properties of wood-plastic powder

Wood-plastic powder is usually made from a mixture of wood fibers, plastic powder, and a small amount of additives. It features low density, wide particle size distribution (commonly 80~200 mesh), moderate fluidity, and easy moisture absorption. Some formulations may contain heat-sensitive ingredients that are sensitive to temperature and friction during conveying. Materials are prone to static electricity during conveying, and fibrous particles are prone to tangling or accumulation, requiring gentle and sealed conveying methods.

Product Introduction: Pneumatic conveying system for wood-plastic powder

Head Powder's pneumatic conveying solution for wood-plastic powder adopts the principles of positive or negative pressure, transporting the wood-plastic powder from the storage end to each production node through sealed pipelines. The system consists of a feeding device, conveying pipelines, air supply equipment, separation and filtration devices, and an intelligent control system, and can be customized according to customer site layout, capacity requirements, and material characteristics. Whether for short-distance feeding or long-distance multi-point distribution, stable and relatively accurate material transfer can be achieved.

Product Advantages: Targeted solutions to customer pain points

To address the issues of wood-plastic powder clogs and dust generation, Head Powder designs smooth inner walls with reasonable bending ratios, combined with pulsating airflow or fluidization technology, effectively reducing material hanging and blockages. The system operates in a fully enclosed manner and is equipped with a high-efficiency dust removal and filtration device, helping to prevent dust leakage and improve the workshop environment. The intelligent control system can monitor conveying pressure, flow, and equipment status in real time, automatically adjust operating parameters, reduce energy consumption, and extend equipment lifespan. At the same time, the modular system design facilitates expansion and maintenance, adapting flexibly to different capacity stages.